10 Best Motorcycle Camera Mounts in 2026

The inclusion of a vibration dampener that cuts over 90% of high-frequency shakes is the core advantage here, directly addressing the leading cause of smartphone camera failure on motorcycles. This makes the Quad Lock Moto Handlebar Kit a premium, protective solution for riders who rely on their phone for navigation and communication. It’s built as a complete, integrated system where the case, mount, and dampener work together, resulting in exceptional security and peace of mind on any road surface.

The system requires using the included Quad Lock MAG case, which integrates with the mount for magnetic convenience. This design is smartphone-centric, unlike universal clamp mounts such as the TELESIN Super Clamp Mount that are listed for action cameras. For riders dedicated to phone use, the kit’s engineered protection remains its defining characteristic.

A clamp that handles surfaces up to 2.5 inches thick means you can secure a camera to a helmet’s chin guard, a spot many mounts can’t reach. This versatility is the core reason it stands out for motocross and enduro riders needing a steady POV shot. Research mentions highlight the Dango Designs Helmet Chin Mount as a solution, though it comes at a higher cost than some alternatives.

The trade-off for this clamping versatility is a bit more bulk and weight on your helmet compared to ultra-slim adhesive options. While the included safety leash adds a layer of security, the mount’s size is more noticeable. For riders who prioritize a minimalist, lightweight chin mount and don’t need the clamping function, a dedicated design like the Kewig may be a better fit. But for those who want one mount that can securely grab a chin bar and also double as a handheld stabilizer, the Dango Design’s flexibility is hard to beat.

A clamp designed for 29mm to 32mm handlebars gives riders of cruisers and adventure bikes a rock-solid foundation for their camera. The premium aluminum alloy build and specific design for high-speed and off-road use mean it’s built to handle vibration and keep your shot steady. This mount is a strong choice if your bike has the real estate for its substantial 11-inch length and you need unwavering security for a camera on rough terrain.

Its 11-inch length can be a trade-off on sportbikes where handlebar space near the controls is limited, potentially interfering with other accessories. For tight installations, a mount with a smaller footprint like the SP Connect Moto Mount 3D is an alternative. The included monopod stand adds versatility for static shots off the bike, but the mount’s primary function is to provide a wide-grip, vibration-resistant anchor point on the handlebar itself.

A clamping range of 8 to 40 millimeters lets you secure this mount to almost any tubular object on your bike, from slender seat posts to thick handlebars. That versatility, combined with its tool-free 360-degree ball head, means you can quickly set up a shot from nearly any angle without carrying extra adapters. For riders who want a single mount that can hop from a motorcycle to a bicycle or even a railing for a static shot, this design eliminates the need for multiple dedicated mounts. It’s a straightforward solution for vloggers and tourers who value quick repositioning over a ride.

This clamp fits handlebars from 8mm to 40mm, so it can attach to most bikes and motorcycles as well as items like railings. Its dual ball-joint design allows tool-free 360-degree angle adjustment for precise camera positioning. The aluminum alloy build and anti-slip pads aim for a secure hold on round or oval tubes. For bulky, non-tubular parts, a U-bolt system like the PGYTECH CapLock could provide a different mounting option.

Its compact 3.9-inch cube profile and ability to mount in the tapered section of your handlebars make this mount exceptionally low-profile and clean-looking. Riders who want a secure, nearly invisible base for a phone or small action camera will appreciate the CNC-machined aluminum build. The 360-degree adjustment lets you fine-tune the shot without bulky hardware cluttering your cockpit, and the vibration reduction helps keep footage smooth over rough pavement.

This mount offers unlimited 360-degree positioning, so you can fine-tune your phone’s screen for perfect visibility while riding. Its CNC-machined aircraft-grade aluminum construction provides a solid, durable feel on the handlebars. Designed to mount specifically in the beveled or conical area of handlebars, it integrates cleanly for a low-profile installation.

The Telesin Super Clamp’s ability to grip anything from a 9mm tube to a 38mm bar is its standout feature. This massive range means a single mount can secure your camera to your motorcycle’s mirror stalk, a thick handlebar, a boat railing, or even a tree branch. It’s built from solid aluminum alloy, so once it’s tightened down, your footage stays rock solid. For riders who want one versatile mount that can adapt to multiple bikes or unconventional shooting locations, this clamping flexibility is the primary reason to choose it.

That versatility comes with a trade-off. At over half a pound, it’s substantially heavier than minimalist options such as a compact CNC-machined cube mount, which is a consideration for riders obsessed with saving every ounce. More importantly, you must heed the safety warning: this clamp is strictly for action cameras. The manufacturer explicitly warns against using it with heavier DSLR or mirrorless gear, as the clamp could fail. For dedicated motorcycle use on a standard handlebar, a simpler, lighter mount might suffice, but if your needs extend beyond the bike, the Telesin’s range is hard to beat.

Its quick-release snap-fit design allows you to securely attach or remove a camera in seconds. The mount includes two tripod adapters offering 180-degree adjustment to fine-tune the camera’s shooting angle. A safety tether is provided to prevent the camera from falling, and the flexible base fits most full-face helmets.

Installation requires adhering the mount to the helmet with strong adhesive pads, a process that needs a clean surface and a 24-hour cure time before use. The manufacturer’s notes specify it should not be used on helmets with a screen protector. For a transferable, clamp-on helmet mount, the Dango Design Gripper Mount offers a mechanical alternative.

The patented rosette system is the core of this mount, delivering 180 degrees of vertical and a full 360 degrees of horizontal rotation that you lock with a single button. This makes it a standout choice for riders who need to fine-tune their camera angle precisely after the bracket is secured to the bike. It suits anyone running a modern action camera from GoPro, DJI, or Insta360, and the inclusion of two cushion blocks means it can grip cleanly on different diameter tubes.

That adjustability has defined limits. PGYTECH states the CapLock is not recommended for use with an extended selfie stick, and if paired with one, it should only be used on flat roads while tightened with the provided wrench. For mounting a phone instead of an action camera, the other-products list includes the Quad Lock Moto Handlebar Kit as a dedicated alternative.

A 59-inch extendable aluminum stick is the core feature that lets riders capture true third-person, ‘invisible’ footage of themselves and their bike in motion. This BRDRC kit is for the rider who wants maximum creative flexibility for cinematic angles, not just a simple handlebar view. The inclusion of two different arm lengths and four total clamps means you can create an incredibly stable, two-point mounting system on a motorcycle’s frame or handlebars. This setup is crucial for eliminating vibration in the final video.

The trade-off for that versatility and reach is complexity. You’re managing a multi-part kit, not a single, compact unit. It’s a system designed for planned filming, not for quickly snapping a camera on and off the bike for a short clip. For riders dedicated to producing polished, dynamic riding videos, this kit delivers the tools. For someone who just wants a simple, always-on handlebar mount, the included components will feel like overkill.

With a clamping range that fits surfaces up to 10mm thick, this mount attaches directly to a motorcycle windshield or car window, freeing your hands for riding. Its all-metal aluminum alloy construction and symmetrical locking structure are designed to enhance shock absorption, aiming for stable footage on various road conditions like mountain or gravel roads. The design provides a low-profile mounting point that does not require handlebar space.

The mount is designed specifically for securing a camera to a thin transparent surface, focusing on that single task with rigidity. For riders who want to use their camera in multiple locations, other products in the category are designed as handlebar or helmet mounts. This unit excels at providing a dedicated, semi-permanent vantage point on the windshield.